FR4 Fiberglass Sheet Guide: Properties, Tolerances and CNC Machining for Insulation Parts

FR4 fiberglass sheet is the default engineering insulation material in electronics — the same glass-epoxy laminate family used for PCB substrates, machined into standoffs, busbar insulators, slot wedges, spacers and fixtures. Buyers specify it because it combines high mechanical strength, stable electrical insulation, and low water absorption at a moderate price.

This guide covers the properties that matter for machined FR4 parts, realistic CNC tolerances, and how FR4 compares with phenolic (electrical board), polycarbonate and acrylic.

What Is FR4?

FR4 is a composite of woven glass fiber cloth and an epoxy resin system, laminated under heat and pressure. The designation comes from NEMA grades: "FR" = flame retardant, "4" = woven glass/epoxy. Typical grades are equivalent to UL94 V-0.

Key characteristics of standard FR4:

Property	Typical value (1.5–3 mm sheet)	Why it matters
Glass transition (Tg)	130 °C (standard) / 170 °C (high-Tg)	Defines continuous-use ceiling
Dielectric constant (1 MHz)	≈ 4.2 – 4.8	Predictable in RF-adjacent designs
Dissipation factor	≈ 0.015 – 0.025	Low dielectric loss
Water absorption	≤ 0.1 – 0.2%	Insulation stable in humid climates
Flexural strength	≈ 400 – 500 MPa	Survives mounting torque and impact
Flame rating	UL94 V-0 equivalent	Required for most safety certs

(Values are typical for commercial-grade laminates; we confirm material certificates per order.)

Where Machined FR4 Parts Are Used

Busbar and IGBT module insulation plates in inverters and drives
Slot insulation and end-laminations in motors and generators
Spacers, standoffs and washers where plastics creep under load
Test fixtures and jigs requiring dimensionally stable, ESD-safe handling
Battery pack insulation sheets in e-mobility assemblies

CNC Machining FR4: What Tolerances Can You Expect?

FR4 machines well but is abrasive on tooling — the glass cloth wears carbide quickly. Realistic tolerances for water-jet / CNC-routed / milled parts:

Feature	Standard tolerance	Precision option
Thickness	±0.10 mm	±0.02 mm (ground/lapped)
Hole diameter	±0.10 mm	±0.05 mm (reamed)
Profile / outline	±0.20 mm	±0.10 mm
Flatness (per 100 mm)	0.3 mm	0.1 mm (stress-relieved)

Design notes from our shop floor:

Keep holes ≥ 1 mm from edges to avoid breakout in thin sheets.
For tight-tolerance holes under M3, specify reaming — drilled-only holes wander with cloth weave.
Anneal/stress-relieve before final machining when flatness matters.
Edge quality: routed edges are acceptable for insulation; specify sanded or polished edges for cosmetic panels.

FR4 vs the Alternatives

Material	Strength	Heat	Insulation	Water uptake	Cost	Choose when
FR4	High	130–170 °C Tg	Excellent	Very low	Medium	Default electrical + structural part
Phenolic (electrical board)	Medium	~120 °C	Good	Higher	Lower	Cost-driven, dry environments
Polycarbonate (PC)	Good	~120 °C	Good	Low	Medium	Transparent covers, impact parts
Acrylic (PMMA)	Brittle	~80 °C	Good	Low	Low	Static transparent panels
Carbon fiber board	Highest	Depends on resin	Conductive	Very low	High	Stiffness-to-weight, ESD/structural

Note: carbon fiber board is conductive — never substitute it for FR4 in an isolation path. See our comparison article on carbon fiber vs FR4.

Sourcing Checklist for RFQ

Send the factory these five items and quotes come back in days, not weeks:

Thickness and sheet size or finished-part dimensions (DXF/PDF)
Tolerance class (standard vs precision table above)
Color: natural (green) / white / black; edge finish
Quantity and delivery batches
Any safety-cert requirement (UL file, RoHS/REACH declaration)

Work With the Laminate Specialist

ChaoRong Electronics (ChaoRong Electronics, Dongguan, China) precision-machines FR4 fiberglass sheets, carbon fiber boards, electrical board (phenolic), PC and acrylic into finished insulation components — from prototype quantities to million-piece schedules, with full material traceability.

→ Request an FR4 machining quote · FR4 product page